Description

The KINGNUT nut is a plastic push-on spring nut.
It can quickly be pushed on to any threaded bolt and tightened. This can be done manually or with the aid of a quick-installation tool.

The thermoplastic material of the KINGNUT nut means:

* significantly better damping in the acoustic area
* no corrosion
* non-conductive properties

Fitting

In contrast to the conventional nuts, the KINGNUT nut is fitted by pushing on and turning by approx. 360 degrees. Compared with the conventional screw nuts this reduces the assembly time by at least 50%.
The KINGNUT nut was developed with suitability for sorting (e.g. vibrating conveyors) and positioning (exact positioning of the KINGNUT nut on threaded bolts by segment bias) in mind. This ensures problem-free automatic assembly.

Weight saving

The KINGNUT nut consists of thermoplastic material and is lighter than a steel nut. The surface pressure is significantly reduced by the larger width across flats and the knurling necessary for assembly. The components to be assembled can therefore be made lighter. Due to reduced surface pressure and better elasticity of the KINGNUT nut, reinforcement of the joining area of two plastic components is no longer necessary.

Standard Deviations

The KINGNUT nut dimensions are larger. The width across flats (A/F) is that of the nearest larger standard dimension. Table 1: Comparison of width across flats. The KINGNUT nut thred consists of a single thread divided into 3 segments.

Material and Colors

The KINGNUT nut consists of a commercial type 6.6 polyamide as standard and, on request, is available in all colours covered. Currently, our stock consists entirely of black KINGNUT nuts. Special properties can be achieved with other thermoplastically processable plastics. Please contact us with your special requirements.